EMERGENCY LOWERING BOARD. P/N 100-145

EMERGENCY LOWERING BOARD. P/N 100-145

Price: RFQ

The 100-145 is used (in conjunction with a UPS) to monitor the loss of normal/mains power to the hydraulic elevator installation. On loss of normal power the 100-145 board switches the installation to the UPS power and signals the controller to commence the emergency lowering routine.

The 100-170, 100-173 and 100-174 hydraulic controllers may be upgraded to incorporate the 100-145 emergency lowering control board.

Parts required for emergency lowering control, when ordered with an ECD controller, are as follows;

• 100-145 emergency lowering control board. (DIN rail mounted). P/N 100-145
• 650VA UPS. (emergency power supply, mounted externally). P/N UPS 650
• 1500VA UPS is also available if larger output required. P/N UPS 1500
• Auxiliary contact on lift main C/B to be supplied by the customer.

If emergency lowering control is requested on an existing ECD controller, ECD can supply an upgrade kit; P/N ELKUPS.

The kit includes a 100-145 board, 650VAUPS, terminals, fixtures, cable, fuse link, C/B, extra duct labels and circuit diagrams. Using this kit, circuit modifications must be done on site to the controller and main C/B.