LCD-35HV DISPLAY
LCD Display
LCD-35HV DISPLAY
Price: RFQ
The LCD-35HV is a full HD colour display for elevators, incorporating the latest TFT colour screen with wide viewing angles.Using 24V inputs, the current elevator position, messages and direction of travel can be displayed. Background images, text type and colour can be fully customized to suit your specific requirements.
Features
Direct Input Mode:
- 6 floor message inputs
- Inputs can be selected as decimal, Gray code or binary via DIP switches (SP DIP switch must be OFF)
- 24V inputs may be positive or negative switched
- 2 direction inputs for direction display
Serial Data Mode:
- Controlled by ECD Encoder Board when SP DIP switch is ON (direct input ignored)
Other Features
- Full colour TFT display.
- Reprogram display, simply use an USB stick to reload to on-board data-flash.
- Display can be mounted either vertically or horizontally.
- Low profile (18mm depth) available with alternate plugs.
- Programming software available.
Settings
DIP switches:
- Dec switch: Select to “ON” for decimal/direct inputs
- Bin switch: Select to “ON” for binary/direct code inputs
- Gray switch: Select to “ON” for Gray code/direct inputs
- SP switch: Serial data mode (direct input mode ignore)
Nb: Only ONE of the above direct input switches shall be selected to “ON”
Link:
To select vertical or horizontal orientation.
Wiring
- Supply is wired to +24 and 0V terminals. This shall be a 24VDC supply.
Note: If a switch mode power supply is used it is recommended that the supply wires be looped through a ferrite core - All inputs use the “C” common terminal as their reference.
- If “C” is 0V then the inputs shall be 24V. (See diagram on next page)
- If “C” is 24V then the inputs shall be 0V
- 1, 2, 4, 8, 16, 32 – The floor position shall be displayed depending on these inputs.
- UP, DN – The direction of travel arrow shall be displayed adjacent to the floor position, depending on the these inputs.